Holy Lolly Gel Polish 7ml

1. Disinfect your and your customer’s hands. Check the condition of the skin, nails and make sure there are no contraindications for performing the procedure.
2. Using a stick or a cuticle pusher delicately push the cuticles away and then work on them using selected bits.
3. Use a 100/180 gradation buffer to mattify the plate and then remove dust with a soft brush.
4. Carefully cleanse each nail using a dust-free cotton swab soaked in purple Cleaner.
5. Cover the nails with primer. In most cases it will be Acid Free Primer. Performing manicure on a more demanding plate, reach for Acid Primer.
6. Apply a thin layer of a selected base coat and cure for 30 seconds.
7. Apply Holy Lolly gel polish and cure in the MultiLed lamp for 60 seconds.
8. Secure the design with a top coat, e.g. Tip Top or Wet Look and cure for 30-60 seconds.
9. Wait for approx. 60 seconds until the top coat cools down.
10. If you chose a top coat with a sticky layer*, remove it with a swab soaked in Shea Super Shine Effect Cleaner.
11. To add more shine to the nails, polish them using a dry swab at the end.

*You don’t have to wipe a top coat without a sticky layer with Shea Super Shine Effect Cleaner. After waiting 1 minute, you can apply the selected Shea Elixir with keratin to nail folds.